Artisan Grasshopper

Micro Setting

5 components in Gems › Micro Setting.

Applies micro-setting cutters, V-cutters, channel and row prongs to a list of gems

Nickname: MicroSetting · Tab: Gems › Micro Setting

Inputs

Name	Nickname	Type	Access	Description
Gems	`Gems`	GemObject	list	List of GemObjects (from any gem component)
Cutters Params (optional)	`Cutters`	Generic	item	Cutter parameters (from MicroSetting - Cutters)
VCutters Params (optional)	`VCutters`	Generic	item	V-Cutter parameters (from MicroSetting - V-Cutters)
Channel Params (optional)	`Channel`	Generic	item	Channel parameters (from MicroSetting - Channel)
Row Prongs Params (optional)	`RowProngs`	Generic	item	Row prong parameters (from MicroSetting - Row Prongs)

Outputs

Name	Nickname	Type	Access	Description
Cutters	`Cutters`	Brep	list	Cutter Breps
V-Cutters	`VCutters`	Brep	list	V-Cutter Breps
Channel	`Channel`	Brep	item	Channel Brep
Row Prongs	`Prongs`	Brep	list	Row prong Breps

Define channel parameters for the MicroSetting component

Nickname: MS Channel · Tab: Gems › Micro Setting

Inputs

Name	Nickname	Type	Access	Default	Description
Enabled (optional)	`On`	Boolean	item	`false`	Enable channel
Shape (optional)	`Shape`	Text	item	`UShape`	Channel shape: UShape, VShape, SquareShape, TrapezoidalShape, ChannelShape
Start Width (optional)	`SW`	Number	item	`2.0`	Start width
Start Height (optional)	`SH`	Number	item	`3.0`	Start height
End Width (optional)	`EW`	Number	item	`2.0`	End width
End Height (optional)	`EH`	Number	item	`3.0`	End height
Start Over Girdle (optional)	`SOG`	Number	item	`0.0`	Start over girdle offset
End Over Girdle (optional)	`EOG`	Number	item	`0.0`	End over girdle offset
Start Extension (optional)	`SExt`	Number	item	`0.0`	Start extension length
End Extension (optional)	`EExt`	Number	item	`0.0`	End extension length
Start Bend (optional)	`SBend`	Number	item	`0.0`	Start bend amount
End Bend (optional)	`EBend`	Number	item	`0.0`	End bend amount
Shape Factor (optional)	`SF`	Number	item	`1.0`	Shape factor
Close (optional)	`Close`	Boolean	item	`false`	Close the channel
Precise (optional)	`Precise`	Boolean	item	`false`	Use precise mode (one profile per gem)
Flat Ends (optional)	`FlatEnds`	Boolean	item	`false`	Use flat end caps
Flip Start (optional)	`FlipS`	Boolean	item	`false`	Flip start profile
Flip End (optional)	`FlipE`	Boolean	item	`false`	Flip end profile
Flip Cap Start (optional)	`FlipCS`	Boolean	item	`false`	Flip start cap
Flip Cap End (optional)	`FlipCE`	Boolean	item	`false`	Flip end cap
Keep (optional)	`Keep`	Boolean	item	`true`	Keep channel in output

Outputs

Name	Nickname	Type	Access	Description
Channel Params	`Channel`	Generic	item	Channel parameters for MicroSetting component

Define cutter parameters for the MicroSetting component

Nickname: MS Cutters · Tab: Gems › Micro Setting

Inputs

Name	Nickname	Type	Access	Default	Description
Enabled (optional)	`On`	Boolean	item	`true`	Enable cutters
Shape (optional)	`Shape`	Text	item	`U_SHAPE`	Cutter shape: U_SHAPE, V_SHAPE, SQUARE_SHAPE, TRAPEZOIDAL_SHAPE, FRENCH_SETTING_SHAPE
Start Width (optional)	`SW`	Number	item	`1.0`	Start width
Start Height (optional)	`SH`	Number	item	`2.0`	Start height
End Width (optional)	`EW`	Number	item	`1.0`	End width
End Height (optional)	`EH`	Number	item	`2.0`	End height
Length (optional)	`Len`	Number	item	`5.0`	Cutter length
Over Girdle (optional)	`OG`	Number	item	`0.0`	Offset over girdle
Over Girdle Middle (optional)	`OGM`	Number	item	`0.0`	Offset over girdle at middle
Shape Factor (optional)	`SF`	Number	item	`1.0`	Shape factor
Keep (optional)	`Keep`	Boolean	item	`true`	Keep cutter in output

Outputs

Name	Nickname	Type	Access	Description
Cutters Params	`Cutters`	Generic	item	Cutter parameters for MicroSetting component

Define row prong parameters for the MicroSetting component

Nickname: MS RowProngs · Tab: Gems › Micro Setting

Inputs

Name	Nickname	Type	Access	Default	Description
Enabled (optional)	`On`	Boolean	item	`false`	Enable row prongs
Diameter (optional)	`Dia`	Number	item	`0.6`	Prong diameter
Height Over Girdle (optional)	`HOver`	Number	item	`0.6`	Height over girdle
Height Under Girdle (optional)	`HUnder`	Number	item	`1.0`	Height under girdle
X Center Prongs (optional)	`PosX`	Number	item	`0.0`	X offset of prong center from gem
Y Center Prongs (optional)	`PosY`	Number	item	`0.0`	Y offset of prong center from gem
Allow Collisions (optional)	`Collide`	Boolean	item	`false`	Allow prong collisions
Close (optional)	`Close`	Boolean	item	`false`	Close the prong row (loop)
Smart Adapt (optional)	`Smart`	Boolean	item	`false`	Adapt prong size to gem size variation

Outputs

Name	Nickname	Type	Access	Description
Row Prongs Params	`RowProngs`	Generic	item	Row prong parameters for MicroSetting component

Define V-cutter parameters for the MicroSetting component

Nickname: MS VCutters · Tab: Gems › Micro Setting

Inputs

Name	Nickname	Type	Access	Default	Description
Enabled (optional)	`On`	Boolean	item	`false`	Enable V-cutters
Start Width (optional)	`SW`	Number	item	`0.5`	Start width
Start Height (optional)	`SH`	Number	item	`2.0`	Start height
End Width (optional)	`EW`	Number	item	`0.5`	End width
End Height (optional)	`EH`	Number	item	`2.0`	End height
Length (optional)	`Len`	Number	item	`3.0`	V-cutter length
Over Girdle (optional)	`OG`	Number	item	`1.0`	Offset over girdle
Keep (optional)	`Keep`	Boolean	item	`true`	Keep V-cutter in output

Outputs

Name	Nickname	Type	Access	Description
VCutters Params	`VCutters`	Generic	item	V-cutter parameters for MicroSetting component