This command allows you to set a selected gem into a Basket configuration.
Al ejecutar este comando se mostrarán sus parámetros en la barra de herramientas Comandos. Su primer paso debe ser elegir si quiere empezar a trabajar en un estilo Estándar proporcionado por 2Shapes, o en un estilo de Organización que haya creado previamente.
On its parameters, you can find the prong configuration as well as their diameter, the height over the gem’s girdle, the whole basket height, among others. Also, you can click on the Rails tab to see the parameters for the lower and upper rails.
When you confirm your changes, the Basket will be listed on the Outliner toolbar.
Exercise 4-7 Setting a diamond in a Basket
1. Open the Basket.3dm Exercise File.
2. Select the diamond above the ring, and run the Basket command, under the Stone Settings menu.
3. Edit the Basket, and select the straight four-prong configuration.
4. Set the following parameters:
Diameter to 1
Height to 4.1
Gem Inside to 0.1
Height to 0.5
Bottom Diameter to 1
Bottom rail Inside to 0.5
5. Open the Rail parameters, and set the following values on the Upper Rail fields:
Width to 1
Height to 1
Height under Girdle to 1
Gem size percentage to 80
6. Set the following parameters on the Base Rail section:
Width to 1
Height to 1.3
Gem size percentage to 45
7. Click on the Confirm changes button.