Skip to content

Commands

Non-Uniform

Non-Uniform

The ScaleNU command changes the size of selected objects in three directions using different lengths for each direction.

Steps

  1. Select objects.
  2. Pick an origin.
  3. Type the x scale factor, or pick two reference points.
    (Press Enter for a scale of 1.0.)
  4. Type the y scale factor, or pick two reference points.
    (Press Enter for a scale of 1.0.)
  5. Type the z scale factor, or pick two reference points.
    (Press Enter for a scale of 1.0.)
    The objects expand or contract in the three directions with the scale factor values specified.

Command-line options

Copy: Specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on.

The RememberCopyOptions command determines whether the selected option is used as the default.

Rigid: Specifies that individual objects will not be deformed as they are transformed.

  • Yes: Individual objects will not change, only their positions will change.
  • No: Individual objects are transformed as well as their positions.

WorldCoordinates: Use world coordinates for the scaling direction.

SubCrv: Type subcrv to select part of a curve as input.

For more information, please refer to the Rhino documentation.